Darbin Orvar

The 100% natural wax polish contains raw linseed oil and natural beeswax in a 4:1 ratio. This polish can be used directly on bare wood, over painted surfaces, over polyurethane, shellac, lacquer and I have even used it outdoors on a work table.

The uses of wax are numerous and I love the raw linseed oil's natural scent and its ability to darken bare wood and its smooth coverage. I have made numerous videos showing both how to make wax polishes and showing how versatile the waxes can be.

How To Apply

To apply this wax/oil polish simply use either an old shirt, rag, steel wool or even a paper towel if you can't find anything else. Apply a thin coat, wait a few minutes and buff the work with a clean rag or paper towel. Paper towels tend to leave pieces on the work piece so be aware of that. I like to use a lint-free cloth if at all possible.

This container holds 4 fluid ounces of wax polish and the weight of the container with the polish is 4 1/2 ounces.

Testimonials

See what some great woodworkers have to say about the waxes! 

This tung oil polish is not a "Tung Oil Finish" that mimics tung oil's properties or feel, this is real tung oil mixed with natural beeswax. There is a 4:1 mix of 100% Tung Oil and natural beeswax. This polish can be used directly on bare wood, over painted surfaces, over polyurethane, shellac, or lacquer.

I have made a few videos that show the procedure for making as well as a number of uses of waxes in general.

How To Apply

To apply this wax/oil polish simply use either an old shirt, rag, steel wool or even a paper towel if you can't find anything else. Apply a thin coat, wait a few minutes and buff the work with a clean rag or paper towel. Paper towels tend to leave pieces on the work piece so be aware of that. I like to use a lint-free cloth if at all possible.

Contains 4 fluid ounces of wax polish. Weight of container and polish is 4 1/2 ounces. 

Testimonials

See what some great woodworkers have to say about the waxes! 

This is probably the most versatile polish of them all. Mineral oil does not cure (dry) so it is perfect for all sorts of uses. I use it to coat my tools, such as hand saws and table saws, and also the bottom of planes. All because when it is added to metal, wood or anything else it will not dry like linseed or tung oil would, which would gum up the tool.

I made sure the mineral oil here was the best I could get, and that it is food-grade cutting board oil. So for these I used General Finishes mineral oil and natural beeswax, which is also food safe.

I use this not just on cutting boards, but bread boards, tools, anything that slides and sometimes even as a final finish. Beeswax and oil based polishes are really so versatile you can really use it on anything. It will not damage any wood, in fact it will prevent rust and water-penetration on just about everything.

How To Apply

To apply this wax/oil polish simply use a clean rag, or even a paper towel if you can't find anything else. Apply a thin coat, wait a few minutes and buff the work with a clean rag or paper towel. Paper towels tend to leave pieces on the work piece so be aware of that. I like to use a lint-free cloth if at all possible.

Contains 4 fluid ounces of wax polish. Weight of container and polish is 4 1/2 ounces. 

Testimonials

See what some great woodworkers have to say about the waxes! 

Included in this plan are the design .svg and .pdf files to cut out the sections to make this plywood computer case + basic step by step instructions.

To create the case you'll need: 1/2" plywood, 1/4" plywood, 1/8" plywood and 1/4" MDF.

This case was designed for a 10" HDMI screen and a 60% mechanical keyboard. If you use other products, I cannot guarantee the fit will be perfect. Here are links to the screen and the keyboard:

• 10.1" Screen - https://amzn.to/442X6C7

• Keyboard - https://amzn.to/3FIneIH

This case was also create to house a Raspberry Pi Zero 2 W, however, there’s plenty of room inside the case, making it easy to modify for other uses or components if needed.

Build two quick and highly functional shop projects from a single 8 foot 2x4: a Small Parts Table Saw Sled with Clamp and a Bench Hook. Both tools are designed to improve safety and precision when working with small pieces of wood— something that’s often awkward or risky on a table saw.

Materials needed to build this project:

• One 8' 2x4 (or just use 3/4" boards)

• 5/16" Tbolt (2 1/4")

• 5point star knob

• Wood glue

The sled includes an integrated clamping system using a homemade Tslot and adjustable clamp to secure small workpieces, while the bench hook is perfect for handsaw work and generalpurpose bench support. With just a table saw and a drill, you can build both of these projects in a weekend using basic joinery, and end up with tools you’ll reach for again and again in your workshop

In this combined bundle, you’ll get ALL of our bookbinding tool plans in order to build the following:

• Book Press

• Sewing Frame

• Book Vise

• Cutting Plough

All of the plans include cutlists, step by step instructions and helpful tips and information. The sewing frame also contain .svg files if you want to cut out those pieces on a CNC machine (or using traditional tools.)

For all of the tools you’ll need access to woodworking equipment as well as wood, glue, clamps etc…

• For the press you’ll a press screw and a metal plate.

• For the sewing frame, book vise and cutting plough you’ll also need access to a 1 1/2” tap and die set in order to make wooden screws.

• For the cutting plough you’ll need a block plane blade.

More detailed information on what’s needed specifically can be found in each plan.

If you prefer, you can purchase each plan individually instead, however if you buy this bundle, you’ll get a discount

• Book Press Building Plan

• Sewing Frame Building Plan

• Book Vise + Cutting Plough Building Plan

This guide will help you build a traditional wooden book press used for bookbinding. It features half-blind dovetails for strength and a heavy-duty press screw with single-lead Acme threads for the screwing/pressing mechanism.

Included in the plan:

• cut lists

• detailed step by step instructions

• diagrams and images to clarify

To construct the main unit, you'll need a press screw and 2 inch (5 cm) thick wood. While slightly thinner wood can be used, the unit won't be as heavy and strong. We used white oak, a traditional choice for its durability. You will also need a piece of 1/4 inch aluminum (or steel) and some screws to assemble the screwing mechanism.

If you use a different type of press screw, you can still adapt the main principles of this design to fit the specifics of the materials you have on hand.

Build a traditional sewing frame for bookbinding with the help of this plan. The sewing frame consists of a base with upright wooden screws and a horizontal bar, allowing the user to align and secure the book sections during the sewing process.

There are two options to build several of the parts: regular woodworking equipment or a CNC machine. Included in this plan are .svg files, as well as cutlist, step by step instructions, information on how to create wooden screws and nuts and more.

This plan contains information on how to make TWO projects: 1) book vise + 2) cutting plough. The book vise is used throughout the bookbinding process to hold the booklet when performing various tasks. If you turn the vise around, then you can fit the cutting plough in a groove and use it to trim the sides of the book super clean.

Included in this plan:

Cutlists & step by step instructions for:

• book vise

• book plough

The book plough requires the vise in order to use it. You can choose to only build the vise, or build both projects.

To build the vise and the plough you’ll primarily need:

• wood

• 1 1/2” tap and die set

• a block plane blade

• woodworking tools

This guide is your blueprint for transforming old, neglected furniture into stunning leather masterpieces. No prior experience or expensive tools required—just actionable steps, thrifty hacks, and useful tips.

What You’ll Get

• Leatherworking essentials

• Working with Leather

• Techniques for Reupholstering

  • Preparation

  • Patching & Repurposing

  • Sewing Leather Panels

  • Pattern Making

  • Gluing, Stretching & Stapling

  • Back Panels

• Finishing & Protecting Leather

• Other Project Ideas.

Why Buy This Guide?

• Save Money: Skip the $1,000 “luxury” chairs—yours will look even better.

• No Waste: Rescues furniture from landfills and leather from scrap bins.

• Skill Building: Master techniques you can apply to ottomans, headboards, and more.

Pattern to cut out a leather eyeglass case either by hand or using a laser engraver. Included in this plan is .svg file as well as printable .pdf file and measurements of the pattern.

Both the shape of the case as well as the holes for sewing are included in the pattern, as well as round patches to secure magnets on the two flaps.

To create a case you’ll need a piece of leather, thread and four small neodymium magnets.

This guide will walk you through building a traditional wooden writing desk with two drawers. Measurements: 30" (76cm) wide x 25" (64cm) deep x 29 3/4" (26cm) high.

Included in the plan:

• Cut lists

• Detailed step by step instructions

• Diagrams and images to clarify

In terms of wood, we’re using oak for this build, however you can use any wood you have access to.

Parts of the build in the plan:

• Gluing a desk top

• Dowel joinery for the frame

• Drawers made with half blind dovetails + boxjoints

• Wooden drawer slides

This guide will walk you through building a classic wooden train table, perfect for children’s play and designed to fit popular wooden train sets. The table is constructed from plywood for durability and ease of assembly, featuring a slot and tab joinery system for strong connections and simple construction.

Overall Dimensions: 41" (104.1cm) wide x 24 1/2" (62.2cm) deep x 18" (45.7cm) high

Plywood used: Frame: 3/4" thick, Sunk in tabletop and shelf: 1/4" thick

The plans include a downloadable .svg file, so if you have access to a CNC machine, you can directly cut out each piece for a precise fit. If a CNC isn’t available, the guide also provides easy to follow instructions to trace the design onto plywood and cut it out using a jigsaw or other basic tools.

Included in this plan:

• SVG file

• Cutlist

• Step by step instructions

This wall cabinet features a fold-out desk with fold-out legs that can be moved out-of-the-way when not in use. The concept is similar to a Murphy-bed and allows a rather large desk to come out into the middle of a small room when needed. The cabinet hangs completely and securely on the wall, and provides 36 inches (914.4 mm) of desk space when extended….

Build your own clean and modern style outdoor sofa using framing lumber. It measures 55” wide and 30” deep. Included are: cut-lists, step by step instructions and scalable svg files.

Building plan come both with imperial & metric cut-lists and drawings.

This purchase contains three files for building your own narrow bookcase. The compressed files contain a pdf, svg and vcarve file, so you can cut out the sections using a cnc machine, or trace and cut out with traditional woodworking tools.

The bookcase is 59” long, 8” deep and 21” high. It’s made in 1/2 inch plywood and features two shelves.

Plans for the mobile shop cart!

These are plans for a rolling compressor shop cart and cubby style drawer organizer and a router bit storage unit.

Three files included: pdf, svg & vcare.

These sawhorse plans include three files: vectric vcarve, svg and pdf.

You only need a hammer and glue with this design, no nails or screws or expertise required.

Can be used as furniture if finished nicely, such as a table or just to hold your work in the shop.

Youtube Video of me building and assembling: https://youtu.be/Zn6WsLt7rhs