Included in this plan are the design .svg and .pdf files to cut out the sections to make this plywood computer case + basic step by step instructions.
To create the case you'll need: 1/2" plywood, 1/4" plywood, 1/8" plywood and 1/4" MDF.
This case was designed for a 10" HDMI screen and a 60% mechanical keyboard. If you use other products, I cannot guarantee the fit will be perfect. Here are links to the screen and the keyboard:
10.1" Screen - https://amzn.to/442X6C7
Keyboard - https://amzn.to/3FIneIH
This case was also create to house a Raspberry Pi Zero 2 W, however, there’s plenty of room inside the case, making it easy to modify for other uses or components if needed.
Included in this plan are the design .svg and .pdf files to cut out the sections to make this plywood computer case + basic step by step instructions.
To create the case you'll need: 1/2" plywood, 1/4" plywood, 1/8" plywood and 1/4" MDF.
This case was designed for a 10" HDMI screen and a 60% mechanical keyboard. If you use other products, I cannot guarantee the fit will be perfect. Here are links to the screen and the keyboard:
10.1" Screen - https://amzn.to/442X6C7
Keyboard - https://amzn.to/3FIneIH
This case was also create to house a Raspberry Pi Zero 2 W, however, there’s plenty of room inside the case, making it easy to modify for other uses or components if needed.
