DIY Selfie Stick w/ Wind Screen
I use my Inventables x-carve to build this DIY selfie stick hack for monopods and tripods.
Double-click to edit...
What Does Darbin Orvar Mean? - July 2015 Shop Update
Subscribe for weekly projects! In this shop update I go over a little of the woodworking and project summer so far - the beach, new wood, Q&A and more...
Double-click to edit...
How To Make a Circle Cutting Jig for a Bandsaw
In this video I show all the steps to building a circle cutting jig for a bandsaw.
Cut List and Metric Measurements
The distance from your blade to the miter track runner will vary with brand.
Wood: 1/2 " (12 mm) Baltic Birch Plywood
A) 1 @ 19 x 15 x 1/2" (483 x 381 x 12mm) - main board
B) 1 @ 10 x 15 x 1/2" (254 x 381 x 12mm) - top side 1
C) 1 @ 7 x 15 x 1/2" (178 x 381 x 12mm) - top side 2
D) 1 @ 2 x 15 x 1/2" (50 x 381 x 12mm) - main track
E) 1 @ 1 x 18 1/2 x 1/2" (25 x 470 x 12mm) - bottom miter t track
F) 1 @ 2 x 15 x 1/2" (50 x 381 x 12mm) - bottom back stop
G) 2 @ 2 x 2 x 1/2" (50 x 50 x 12mm) - knob
3/4" Screws - 20mm
1 1/4" Screws - 30mm
1 @ 1/4" dowel 6mm, cut to 20mm
1 @ 1/4 " pronged tee nut
1 @ 1 1/4" bolt
15" Seamstress measuring tape 381mm
Double-click to edit...
Bandsaw Update & a Couple Jig ideas
In this video I go over my new Laguna 14-12 Bandsaw. I made a quick log cutting jig and gave it a couple runs.
Double-click to edit...
How To Make a Cross Cut Sled for a Table Saw
In this video I show how to build a cross cut sled table saw. http://darbinorvar.com
I used baltic birch plywood and angle aluminium with some bolts and screws for this build.
Cut List: 1/2 inch (12 mm) Plywood:
A) 1 @ 18 x 14 inches (457 x 356 mm)
B) 2 @ 17 by 3 1/4 inches (432 x 83 mm)
C) 4 @ 18 by 3 1/4 inches (457 x 83 mm)
D) 4 @ 3 1/4 by 2 1/2 inches (83 x 64 mm)
E) 1 @ 10 15/16th by 1 3/4 inches (278 x 44 mm)
F) 2 @ 3 1/4 by 3 1/4 inches (83 x 83 mm)
G) 2 @ 2 by 2 inches (50 x 50 mm)
1/8 inch 3/4 " (3 x 19 mm) Angled Aluminum:
2 @ 18 inches (457 mm)
2 @ 1 3/4 inches (44 mm)
Screws & Hardware:
1 1/4 inch screws (30 mm)
1 inch screws (25 mm)
3/4 inch screws (19 mm)
3 1/2 inch long, 5/16 bolt (90 x 8 mm)
5/16 inch nuts (8 mm)
variety of bits
Double-click to edit...