Ultimate DIY Small Parts Organization Caddy

Desktop Organizer - Parts Used (Affiliate Links)

Dewalt Table Saw - http://amzn.to/1PC1Iy7 (This is the model I use)
Dewalt 611 Router - http://amzn.to/23aS27S
23 Gauge Pin Nailer - http://amzn.to/1PC1yH8
De-Waxed Shellac - http://amzn.to/1PC1BTk
Water-Based Poly - http://amzn.to/1PmCzqT

---

Cut List

Using 1/2" MDF
1 @ 25" x 37" - Base
2 @ 7 1/2" x 8" - Sides
2 @ 36 1/2 x 8" - Shelves
1 @ 3/4" x 36" - Top Railing
2 @ 3/4" x 8" - Side Railings
2 @ 3/4" x 17" - Base Stops
2 @ 3" x 8" - Bottom Supports

Using 1/4" MDF
18 @ 2 1/4" x 8" - Cubbie Dividers
20 @ 2 3/4" x 7 1/2" - Drawer Bottoms
40 @ 1 7/8" x 7 1/2" - Drawer Sides
40 @ 1 7/8" x 3 1/4" - Drawer Fronts & Backs
1 @ 37" x 8 3/4" - Back of Organizer